Features and Benefits
- Naturally hydrophobic PTFE membrane with excellent porosity, high low rate
- Absolute rating, filtration efficiency ≥99.99%, Up to 0.01 micron in gas sterile
- Low pressure drop and long service life
- Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents
- High temperature endurance performance
- 100% integrity tested before final assembly
- Replace Sartorius ,Pall or Millipore Filter is available
Typical Applications
- Compressed air, CO2 line sterile filtration;
- Tank vent, Fermentation air,
- Air filtration in aseptic packaging.
- Aggressive acids, Bases, Solvents;
- Photoresists, Etch Solutions;
Table : Typical water flow rate (10″)
Specifications
| Materials Of Construction | Filter Media: | Hydrophobic PTFE membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene/Stainless Steel | |||||
| Outer Cage: | Reinforced Polypropylene | |||||
| End caps: | Polypropylene / Stainless Steel Insert | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, 100 cycles, Autoclave 30minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
Order Information
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | IPF | 010-0.1um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F- FOOD & BEVERAGE | 020-0.2um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| 045-0.45um | BN-222/FIN | 30-30″ | V-viton | |||
| BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPF045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||