Features and Benefits
- Extremely robust construction, high mechanical strength
- Ideal for aggressive solvents, viscous and hot solutions
- Backwashable and cleaned by chemical solvent, hot water, steam, long service life
- Pleated Cartridge provides higher filtration area
- Removal rating from 5 to 100 microns
Typical Applications
- Steam filtration;
- Prefiltration and decarbonization of high viscosity liquid filtration;
- Removing impuriteis ofliquids in Petrochemical industry;
- Agressive solvents filtration;
- Highly corrosive liquid and gas purification;
- Liquids or gases filtration in high temperature and pressure;
Table : Typical water flow rate (10″)
Specifications For Pleated Style
Materials Of Construction | Filter Media: | SUS316L Mesh Pleated | ||||
Micron Rating: | 0.45-100 um | |||||
Porosity: | 60%-65% | |||||
O-rings/gaskets(only for 222, 226, DOE ends): | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
Filtratioin Efficiency: | 95%-99% | |||||
Cartridge Dimensions | Outer Diameter | 60mm/80mm | ||||
Length(based on Cut Ends) | 10″- 250mm, 20″- 500mm, 30″-750mm, 40″- 1000mm | |||||
Operating conditions | Max.Operating Temperature.: | 300℃ (572℉) | ||||
Max. Differential Pressure: | 6.0 bar | |||||
PH Value compatibility: | 1-14 |
Specifications For Powder Sintered Style
Materials Of Construction | Filter Media: | SUS316L Powder Sintered | ||||
Micron Rating: | 1.0, 3.0, 5.0, 10um | |||||
Porosity: | 35%-45% | |||||
O-rings/gaskets(only for 222, 226, DOE ends): | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
Filtratioin Efficiency: | 95%-99% | |||||
Cartridge Dimensions | Outer Diameter | 60mm/80mm | ||||
Length(based on Cut Ends) | 10″- 250mm, 20″- 500mm, 30″-750mm, 40″- 1000mm | |||||
Operating conditions | Max.Operating Temperature.: | 300℃ (572℉) | ||||
Max. Differential Pressure: | 6.0 bar | |||||
PH Value compatibility: | 1-14 |
Order Information
PRODUCT | MICRON | Outer Dia. | ADAPTER | LENGTH | O-RING / GASKET | |
STS | 100-1um | D60-60mm | NIL- Cut Ends (Cylinder) | 10-10″ | S-silicone; N-nitrile | |
STP | 300-3um | D80-80mm | AA- DOE ( With Gaskets) | 20-20″ | E-epdm ; T-teflon (Encaptulated) | |
500-5um | BF-222/ Seal | 30-30″ | V-vition | |||
1000-10um | CF-226/ Seal | 40-40″ | How to Order?- Example | |||
2000-20um | YBP- 1″ BSP Threaded | 05-5″ | STP; Micron:5um; Outer Dia.:60mm; Length:10″; Adapter:1″BSP; O-rings: Silicone Selection Code is: STP500D60YBP10S |
|||
HBP- 1/2″ BSP Threaded | Other-XX | |||||
Selection Code is: PSS100D63AA10P |